Friday, January 16, 2015

Toyota Lies about Plastic Pulleys that caused Deaths!



The people were killed because of TOYOTA'S Defective Design:



And TOYOTA LIES? [see comments below]


Trudy Baltazar authored this book to document the fight of strangers to free Koua Fong Lee:



Ms. Baltazar is in the courtroom documenting the trial against TOYOTA and has been commenting elsewhere.



Update of courtroom activity on Thurs., 1-15-15
 
A toyota employee gave a deposition on 12-4-14 (they showed the dep in court for us all to see) stating heat tests were conducted on these 2 plastic pulleys which have been proven to be defective when exposed to a certain degree & amount of heat.
 
The pulleys are part of the throttle body and they control the accelerator cable. When the upper pulley is working properly, the pulley will release the accelerator cable when one takes their foot off the gas. I think I mentioned yesterday the expert mech engr who heated the pulleys to 165 deg and the top pulley that the accelerator cable goes into binds up against the metal bracket it’s up against and won't release the accelerator cable. It appears the pulley gets stuck to the metal bracket/plate.
It took ~7 mins for the pulley to cool down and release the accelerator cable. Well in the toyota deposition, this employee of 40+ yrs stated that they had heat tests done on these pulleys for 8 days @ 248 deg F. This expert for the plaintiff’s used a hair dryer for 30 mins and got the pulley to heat up to 165 deg and the pulley wouldn't function properly at that temp. Well 3 weeks before toyota employee gave the deposition, they learned that the heat tests on the plastic pulleys had NEVER been conducted!
 
Three weeks later this toyota employee swore in a deposition that the tests were done. In cross examination, the toyota lawyer asked the expert John Stilson, "did you take the 1996 Camry for a drive and hook up monitoring equipment to the pulleys and the metal bracket to see in real life situation if the pulleys were heating up due to real driving time? Expert's answer, "no, because I wanted to follow toyota test specification". cross examination ended not too long after that.
 
Turns out it’s in toyota’s own 1996 Camry owner’s manual that (paraphrasing here) ‘If you need to conduct a test to see if a part is malfunctioning due to heat, use a hair dryer’ and they even show a picture of a hair dryer.
 
 
 
 
 
 
 
 

No comments:

Post a Comment